Browse all practice questions for the NCTI Progression Construction Coordinator II - III Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

NCTI Progression Construction Coordinator II - III Practice Exam course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Why is cost control significant in construction projects?
  • Why are strength members important in fiber-optic cable?
  • When is it essential to use the intermediate pull technique during fiber-optic cable installation?
  • What is the purpose of buffer tubes in a fiber-optic cable?
  • What is the minimum amount of slack required for splicing fiber-optic cable in underground installations?
  • If an optical time domain reflectometer (OTDR) trace shows one optical splice when there are known to be two, what is the probable cause?
  • What activities are involved in site preparation?
  • How is network topology best described?
  • Why is stakeholder management crucial in construction?
  • What is the typical purpose of using macrobends in fiber optics?
  • What is a likely result of excessive microbending in optical fibers?
  • What is the primary purpose of a construction contract?
  • Which type of network topology predominantly routes around cities and industrial areas?
  • Why is -48 VDC with a positive ground commonly used in the telecommunications industry?
  • Why do broadband cable operators install fiber-optic cable in stages?
  • Which of these items should be identified on a route map?
  • How does technology impact modern construction management?
  • What is one primary benefit of using splice closures for fiber optics?
  • What do effective project specifications help ensure?
  • Why do many optical nodes utilize two independent power supplies?
  • What is a primary benefit of using fiber optic cables over coaxial cables in network design?
  • What is the primary function of a splice closure in fiber-optic installations?
  • What is an essential benefit of equipment leasing in construction?
  • Which category of fiber-optic cable design typically uses some variation of the star topology?
  • What is a critical outcome of cross-functional collaboration in construction?
  • What must be defined in fiber network restoration planning to maintain the relevance of the restoration plan document?
  • What does an environmental impact assessment (EIA) evaluate?
  • What determines the number of rectifiers used in a DC power plant design?
  • What is a design option for a broadband cable network to maximize the use of its optical fiber resources?
  • What does "cross-functional collaboration" entail in construction?
  • What does quality control in construction focus on?
  • What is the role of a task option in an OTDR?
  • What is the significance of resource allocation in construction projects?
  • What is the purpose of conducting a risk assessment in construction?
  • What happens to the timing sequence in restoration flow charts as experience is gained?
  • What are two critical factors for successfully installing fiber-optic cable?
  • What is the primary responsibility of a site supervisor?
  • What is the main purpose of a project kickoff meeting?
  • What is the primary objective of risk mitigation in project management?
  • What does conflict resolution in construction management involve?
  • What is integral to the process of network troubleshooting in optical systems?
  • What is the focus of construction waste management?
  • What is the function of splice trays inside splice closures?
  • What is a key difference between fiber-to-the-node (FTTN) and fiber-to-the-curb (FTTC) topologies?
  • Which passive optical network (PON) architecture aims to connect businesses, schools, and libraries to the internet in a cost-effective manner?
  • What does a point-to-multipoint (P2MP) topology include?
  • Which components are used in outside plant fiber-optic cable to protect the optical fibers?
  • How is collaboration defined in a construction environment?
  • Where is a mid-entry splice typically installed in a fiber-optic cable network?
  • What is one example of a stipulation in a franchise agreement that would affect network design?
  • Which fiber-to-the-x (FTTx) topology uses a passive optical network (PON) for a P2MP connection?
  • Why might a technician who is troubleshooting an outage in an optical network want to refer to the networks as-built documentation?
  • What can facilitate necessary documentation during fiber restoration?
  • Which statement is true about a centralized power node?
  • What do optical time domain reflectometer (OTDR) displays and controls encompass?
  • What is an important consideration when splicing fiber-optic cables?
  • Which two techniques are recommended for preventing excessive pulling tension through a conduit during underground installations?
  • Full-feature optical time domain reflectometers (OTDR) can have options for which of the following modules?
  • What is a common option for connecting an optical node to its power supply?
  • What is true about a diagram of restoration responsibilities?
  • What is the purpose of a punch list in construction?
  • What is the significance of setting expectations during the kickoff meeting?
  • Which factor is critical in deciding the placement of fiber-optic cables in a network?
  • Why are Velcro straps preferred over standard plastic tie wraps when bundling pigtails for storage in a splice panel?
  • What is true of the offline type uninterruptible power supplies (UPS)?
  • How does water affect the glass core of an optical fiber?
  • What does a feasibility study assess in construction projects?
  • Which type of fusion splicer is ideal for fiber-to-the-x (FTTx) splicing?
  • Which of the following describes a key benefit of using a star topology?
  • Which statement is true regarding online uninterruptible power supply (UPS) systems?
  • What is one advantage of using flexible conduit in installations?
  • What is stakeholder analysis?
  • In network topology, what does the term "mesh" refer to?
  • What is "Lean Construction" primarily focused on?
  • Which statement best describes the impact of a fiber optic network on service reliability?
  • Which rungs of a ladder are prohibited for standing while working?
  • What defines a buyer’s market in construction contracting?
  • What does a change order accomplish?
  • In structuring a flow chart of basic restoration activities, what is an important consideration?
  • When would a mid-entry splice in a fiber-optic network be used?
  • What are some prerequisites before performing a fusion splice of optical fibers?
  • Why is team building important in construction project management?
  • What is the reason for removing approximately 2.5 cm (1 inch) of jacket and armor from a fiber-optic cable?
  • What key aspect is improved through effective labor force management?
  • What could be a consequence of improper optical splice alignment?
  • Which statement about fiber restoration safety is true?
  • What is the minimum clearance between a power's secondary conductor and a fiber-optic cable in a cable span?
  • How does a scheduler contribute to the success of a construction project?
  • The 10G-EPON access architecture supports what upstream data rates?
  • Where can failures typically arise within fiber-optic equipment room facilities?
  • What happens if the fiberglass strength member is cut too short?
  • Which consideration would be most important when planning a new fiber-optic installation?
  • What does an Optical Line Terminal (OLT) include in its configuration?
  • What requirement has emerged for next-generation access network architectures?
  • What is a significant advantage of using fiber-optic cables in broadband networks?
  • What advantage does RF over glass (RFoG) provide that allows it to work with GPON and EPON?
  • How does the high air speed blowing (HASB) method of installing fiber-optic cable differ from traditional methods?
  • Why is stakeholder analysis important in construction projects?
  • What should be done before using a ladder when working on installation projects?
  • What class of optical transmitter is considered the safest for the human eye?
  • What is the primary goal of Data Over Cable Service Interface Specification (DOCSIS) Provisioning in Ethernet PON (EPON)?
  • Which factor does NOT affect the performance of an optical fiber?
  • Which network topology is characterized by a central hub connected to all other nodes directly?
  • What are project deliverables?
  • How does communication impact project management?
  • Why are backup AC generators often included in commercial AC UPS and DC power systems?
  • What are the two accepted methods for pulling fiber-optic cable off the cable reel in aerial installations?
  • What is the process of quantifying and listing all materials required for a project based on drawings and specifications?
  • How is the index of refraction (IOR) calculated?
  • Who is responsible for confirming the best equipment setup locations during emergency repair?
  • What can be accomplished by converting to an underground installation during outside plant fiber-optic restorations?
  • In a construction context, what is the main goal of safety management?
  • What is the primary role of a Construction Coordinator?
  • Which statement correctly describes mainframe optical time domain reflectometers (OTDR)?
  • Which network topology allows for easier troubleshooting from a central location?
  • What are "weather delays" in construction?
  • When preparing fiber-optic cable for connection to a patch panel, how much buffer tube and fiber slack should be provided?
  • What is one effect of not providing sufficient slack in fiber-optic cable installations?
  • What should be done with fiber-optic cable at the coaxial cable expansion loops during installation?
  • What is an advantage of having slack fiber-optic cable?
  • What is discussed in an "on-site safety meeting"?
  • Which of the following best defines the goal of team building in construction management?
  • What is a significant safety concern when installing aerial fiber-optic cable between poles?
  • What is the ideal way for a broadband cable network designer to plan the replacement of coaxial cable with fiber-optic cable to shorten amplifier cascades?
  • What is the wavelength allocation for video distribution in broadband PON (BPON) access systems?
  • What information should always be included in fiber optic network documentation?
  • In the absence of a pull line in a conduit, what can be used as a substitute pulling line?
  • What is the primary function of a construction budget?
  • Which fusion splicer alignment method uses a camera to align the optical fibers before splicing?
  • What is the primary role of a "scheduler" in construction projects?
  • What device can be attached to a pulling line to avoid twisting the fiber-optic cable during installation?
  • When installing aerial fiber-optic cable, how should the cable trailer be positioned to prevent damage to the cable?
  • What role do construction specifications play in a project?
  • What is a unique feature of a fiber break locator?
  • What does "pacing" in construction scheduling refer to?
  • In a hybrid fiber/coax (HFC) fiber optic node, what are typical voltages produced by DC power supplies?
  • What is meant by "value engineering" in construction?
  • What aspect do feasibility studies primarily aim to determine?
  • What is true regarding reflections in an optical fiber?
  • Which type of cable is an example of transport media in a telecommunications network?
  • What is the main hazard associated with the installation of fiber-optic cables along utility poles?
  • Which type of passive optical network (PON) access architecture replaced asynchronous PON (APON)?
  • What is the primary purpose of grounding fiber-optic cables to earth?
  • What are building codes designed to ensure?
  • What step should be performed at the beginning of every fusion splicing operation?
  • Which standard governs safety in confined spaces?
  • If tight-buffered distribution fiber optic cable is installed between the master splice panel and a rack-mounted fiber-optic distribution panel, where must the distribution panel be located?
  • Which condition can negatively impact fiber-optic cable transfers during installation?
  • What does an estimate in construction budgeting provide?
  • What is the purpose of the call list concerning fiber-optic restorations?
  • Which type of map contains node information?
  • What is true regarding a temporary fiber-optic restoration?
  • What does the procurement process in construction involve?
  • Why is a schedule important in construction projects?
  • What does conducting site inspections involve?
  • What does time management involve in construction projects?
  • What is considered the best way to plan proficiency training for fiber restoration?
  • What focus does an on-site safety meeting typically have?
  • What is a useful question to include in a restoration planning questionnaire?
  • Which of the following describes the nonreflective signatures of an optical time domain reflectometer (OTDR)?
  • The quality and attenuation value of a mechanical splice of optical fibers is dependent on which tool during the preparation process?
  • What aspect of light does Rayleigh scattering primarily relate to?
  • What is the first order of business for the fiber-optic field restoration coordinator (FRC)?
  • What term describes an individual or company hired for specific tasks in a construction project?
  • What does "labor force management" involve?
  • What basic resources are required to respond to a major fiber network outage?
  • What is the role of an optical splitter within a passive optical network (PON)?
  • What is the minimum depth that drop cables must be placed according to the National Electrical Safety Code (NESC)?
  • What precautions should be taken to prevent static electricity buildup on aerial fiber-optic cables?
  • Which of the following is a benefit of a point-to-point (P2P) topology?
  • What does the National Electrical Safety Code (NESC) provide guidelines for regarding fiber-optic cable networks?
  • What type of PON topology places optical splitters at the headend and routes them to individual customer premises?
  • What should be done with the fiberglass rod strength member when preparing a splice closure?
  • In a passive optical network (PON), what type of fiber-optic cable is used from the headend to the optical distribution network (ODN)?
  • What information is documented at slack and splice locations in fiber-optic installations?
  • Why is it important to clean fiber strippers and hand tools after use?
  • What is a Project Management Plan?
  • When activating a fiber-optic network, which acceptance-testing stage includes adjusting attenuation levels for the first time?
  • What is the purpose of a "client briefing"?
  • Which of the following statements about optical fiber splicing is TRUE?
  • What is meant by "equipment leasing" in construction?
  • How should buffer tubes be secured within a splice closure?
  • What is a construction timeline?
  • How many meters of slack cable are typically used in an aerial installation?
  • What is the maximum upstream data rate supported by XG-PON1 (10G-PON) access architecture?
  • What common cause of higher losses occurs in RFoG and PON FTTx systems due to improper handling?
  • What level of cost savings can be achieved by eliminating pulling lines using the HASB method?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy